Glass Mounting

Installation in insulating glass

General

  • The easiest way to install a petWALK pet door is the assembly into double or triple laminated glazing. A new glass pane with the correct aperture and a firm frame around this opening has to be ordered at your window company or glazier.
  • Then the animal door is simply „clamped“ and the installation is done. A circumferential seal on both frames creates an air - and wa- tertight connection.
  • The glass installation is characterized mainly by a rapid and clean installation and facilitates the smooth deconstruction in case of change of residence.

Cut out aperture

  • For the correct installation of a petWALK pet door the aperture for your chosen model has to be as precise as possible.
  • The dimensions of the aperture are 38 cm ± 1 x 53 cm ± 1 cm for the model „Medium“.
  • For the model „Large“ the aperture must have a size of 48 cm ± 1 x 73 cm ± 1.
  • It must be ensured that at least 30 mm space up to a bound of the component is available around the aperture so that the frame of the petWALK pet door can be mounted easily.
  • The petWALK pet door must be installed into ESG glass/ at least double glazing. The petWALK pet door is not suitable for an installation into a single glass panel!
  • Some insulating glass producers demand for technical reasons a distance of opening to the outside edge of the element of at least 5 cm all round for stability reasons. Thus, a minimum recommended size of the glass element of 48 cm x 63 cm for the model "medium" and 58 cm x 83 cm results for the model "Large".
  • The inner edges of the glass cut may have an inner radius of up to 1cm, if necessary.
  • At lower glass latitudes a cross-bar (horizontal bar) just above the planned installation position of the door can be installed and a correspondingly smaller sized glass pane can be designated at the top.
  • Position the door as close as possible to a glass bar. So you can easily hide the connection cables behind it.

Tipps

  • When installed in a door leaf, we recommend using a door contact. If the wing is opened the function of the pet door is prevented, with an open door the petWALK pet door closes immediately. Thus, a collision is prevented. For connection to the petWALK door a door-in-door connection cable is required.
  • In case there are especially high demands on the thermal insulation properties of the pet door, you can reduce the already excellent U-value to less than 0.5 W/m2K using the optional frame insulation.
  • By default the petWALK pet door module is suitable for component thicknesses up to 10 cm. Depending on the component strength, turn out the threaded rods correspondingly far from the outer frame out, so that you get hold of the screw the threaded rod. When tightening the screw, the threaded rod by itself turns back into it accordingly so that a secure hold is given.
  • At lower latitudes glass a cross-bar just above the planned installation position of the door could split the plane with a correspondingly smaller dimensioned glass pane at the top. The petWALK pet door can then be mounted in a cartridge ready made below the bar. It should be noted that circumferentially still at least 30 mm of space needs to remain available from the side edges of the opening up to a limit of the component. In the same way the door would be fitted into a door panel with smooth surfaces.

Installation Video

Installation Instructions

Installation Details

Mounting detail for 2-pane insulated glazing with spacer
Mounting detail in 3-pane insulated glazing with spacer and optional additional insulation
Installation examples
  • Wohnhaus (Argau, CH)

    • Einbauort: Wohnzimmer
    • Einbauart: Paneleinbau
    • Anforderung: Gleichzeitige Benutzung von Hunden und Katzen mit implantierten Transpondern
    • Umsetzung: Der Fixteil einer Terassentüre wurden durch ein Panel getauscht und in dieses die petWALk Türe eingebaut.
    • Rückmeldung:"Super Tiertüre und der Service der Firma ist äusserst zuvorkommend und herzlich. Ich hab schon Filmchen gepostet...:-) Wir haben die Türe nun ein Jahr."
    • Unsere Tiertüre, sowohl für die Katz als auch für den Hund

      Posted by Markus Looser on Montag, 2. Juni 2014
      Unsere Tiertüre, sowohl für die Katz als auch für den Hund Posted by Markus Looser on Montag, 2. Juni 2014

  • Wohnhaus (Niederösterreich, AT)

    Wohnhaus (Niederösterreich, AT)
    • Einbauort: Vorraum
    • Einbauart: Fenstereinbau
    • Anforderung: Einfache Benutzung
    • Eine tierliebende Familie wollte zwei in die Jahre gekommenen Streunern einen warmen Unterschlupf für kalte Winternächte bieten und hat dafür den Vorraum des Hauses vorgesehen. Die beiden Kater sollten weder einen implantierten Chip noch ein Halsband bekommen. Die petWALK Tiertüre wurde dazu in einen Fensterflügel eingebaut und das Dekor den Rollos angepasst.
    • Rückmeldung: "Es war einfach wunderschön zu sehen, wie sehr sich die beiden Kater über die neue Türe gefreut haben und aufgeblüht sind. Obwohl gerade ein Kater große Angst hat, eingesperrt zu werden, hat er in kürzester Zeit Vertrauen zur petWALK Türe gefasst und der andere hat einfach ein Lächeln im Gesicht, wenn er stolz durch "seine" Türe geht."

  • Wohnung mit Garten (Wien, AT)

    opinion03
    • Einbauort: Wohnraum
    • Einbauart: Fixverglasung
    • Anforderung: Kindersicher, Winddicht
    • Die junge Famile ist mit Ihren beiden Katzen und ihrem Baby in eine neue Wohnung mit großem Garten gezogen. Der großzügige Wohnraum ist zum Garten hin fast vollständig verglast. Der Einbau der petWALK Tiertüre erfolgte in einem sehr schmalen Seitenteil mittels eines Paneels, auf dem die Glasscheibe steht.
    • Rückmeldung: "Wir wollten, dass unsere beiden Katzen den Garten benutzen können, ohne dass wir uns Sorgen um unseren kleinen Sohn machen müssen oder die Wohnräume durch undichte Katzenklappen kalt und ungemütlich werden. Nur petWALK Tiertüren sind absolut winddicht und können die implantieren Tierchips auch für die Ausgangskontrolle nützen. So öffnet die Türe für unsere Katzen, aber nicht wenn unser Kind davor spielt. Einfach klasse!"

  • Wohnhaus (Nordrhein-Westfalen, DE)

    opinion07
    • Einbauort: Wohnraum
    • Einbauart: Glastüre
    • Anforderung: Wohnkomfort
    • Umsetzung: In einer bestehenden Terassentüre wurde die Glasscheibe durch eine Scheibe mit dem entsprechenden Ausschnitt getauscht.
    • Rückmeldung: "Die Tür ist sensationell. ...der Glaser hat ziemlich lange auf sich warten lassen... ...unser Kalle hat die Funktionsweise innerhalb von Minuten verstanden..."